How do I reset my Kaba safe lock?

Oracode integrates a web application, handheld maintenance unit or controller, and a lock(s) to create a system for generating encrypted numerical codes. If the correct six-digit code is entered that corresponds with the dates and time, then the lock will grant access.

Lock Code Change – Kaba Locks

  1. Enter the existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6), turn handle counter-clockwise and pull door open.
  2. Press “#” the “1” hear a double beep.
  3. Enter existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6).
  4. Select and enter a new six (6) digit code.

how does a Kaba lock work? Oracode integrates a web application, handheld maintenance unit or controller, and a lock(s) to create a system for generating encrypted numerical codes. If the correct six-digit code is entered that corresponds with the dates and time, then the lock will grant access.

Likewise, people ask, how do you reset a LaGard lock?

How to Reset LaGard Electronic Locks

  1. Open the door of the safe or room that uses the La Gard lock by entering the lock’s current combination.
  2. Press the “0” key six times, then enter the current six-digit combination one time.
  3. Enter the newly chosen six-digit combination two times.
  4. Test the lock to see if it opens before shutting the door.

What do you do if your safe won’t open?

Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.

How do I reset my digital safe code?

Instructions for an Electronic Digital Safe Enter your code on the keypad located on the front of the safe. Turn the handle to the right within five seconds of correctly entering the code. Open the safe with a key. Enter your code to open the safe. Place the electronic digital safe into code reset mode. Enter your new code on the keypad and press “#” to finish.

How do you change the combination on a safe?

How to Change the Combination for a Safe Identify the marks for opening and changing the lock. Open the safe door and throw the lock bolts into the extended position. Turn the combination knob counterclockwise until the first number has passed the change mark three times. Rotate the knob clockwise until the second number has passed the change mark twice.

What is a Kaba Mas lock?

Kaba Mas X-10 High Security Combination Lock Specification FF-L-2890B locks installed on pedestrian doors to Secure Rooms and Sensitive Compartmented Information Facilities (SCIFs). The X-10 is self-powered, using green “PowerStar” Technology. Simply rotate the dial to power up the lock and enter the combination.

How do you open an electronic safe without the combination?

2 Way on how to open a digital safe without a combination Step 1: Look for the bolt openings at the back of your safe. Step 2: Peer through the hole. Step 3: Press the reset button. Step 4: Enter the new code at the safe’s exterior keypad. Step #1: Turn the dial of the safe the wrong way. Step #2: Hit the safe.

How do I reset my luggage lock?

Steps Unlock the lock first. Most of the time, your lock has to be on the correct combination before you can change the combination to something else. Find the reset button. Often, the lock will have a little reset button on the bottom or side of the lock. Put in your new combination. Release the button.

How do I open a La Gard Safe?

LA GARD mechanical locks are shipped with the factory combination of 50. Open using the OPeNiNG index: 4 x Turn dial to the LeFT (CCW) passing “50” three times. Then stop exactly on the number “50” the fourth time.