How do you build a straight fence?

Decide how far apart you’d like to set the fence posts. Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

Decide how far apart you’d like to set the fence posts. Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

Subsequently, question is, how do I keep my fence post from rotting?

  1. Set the wooden fence posts in a cool, dry area with plenty of air circulation so the wood can dry.
  2. Brush the bottom third or bottom half of the fence post with waterborne copper naphthenate, a wood preservative that is free of arsenic and chromium.

Moreover, is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How do you stock a fence?

Twelve top tips for perfect fencing

  1. Guide your posts. Run a single strand of plain wire between your straining posts (situated at either end of the fence line).
  2. Tying-off.
  3. Avoid over-specified fencing.
  4. Straining posts.
  5. Dig deep.
  6. Get tension right.
  7. Barbed staples.
  8. High-tensile fencing.

How do you level a fence post on uneven ground?

Keep the picket tops level to build a fence over uneven ground. Mark your fence line with wood stakes and mason’s twine. Dig the post holes 10 to 12 inches across and 24 inches deep. Attach two, 2×4 runners, one 3 inches above the ground and one 3 inches below the top of the posts, between the first two posts.

Do you need a permit to put up a fence?

Fence Building Permits. A Building Permit may be required for front, side and boundary fences. Depending on where the fence will be located there may also be different height requirements. If your fence is within 9m of a street intersection it must not exceed 1m in height.

How many rails do I need for a 5 foot fence?

You will have to figure how many boards you need to purchase to ‘rip’ your custom pickets. It is recommended that you use a minimum of 2 horizontal rails between posts for all fences less than 5′ high, 3 rails for fences 5′ to 7′ high, and 4 rails for 8′ high fences.

How many rails do I need for a 6 foot fence?

three rails