How do you run a washing machine drain?

If the drain of your washing machine fits tightly into the drain, you definitely need a washing machine drain vent. It allows air in which prevents the possibility of a vacuum forming that could affect the water draining from your washing machine.

Washer Drain

  1. Locate a drainpipe to which you can connect the washer drain.
  2. Cut the pipe with a hacksaw and install a wye fitting or a sanitary tee, depending on the orientation of the pipe.
  3. Run a length of 2-inch ABS pipe to the wall behind the washing machine.

Also, does a washing machine drain need a vent? If the drain of your washing machine fits tightly into the drain, you definitely need a washing machine drain vent. It allows air in which prevents the possibility of a vacuum forming that could affect the water draining from your washing machine.

Hereof, where does a washing machine drain to?

Washing machines drain into what is called a standpipe. A standpipe is a vertical piece of pipe with an elbow on the bottom. The elbow remains filled with water, preventing sewer gas from backing up into your laundry area.

How high does a washing machine drain need to be?

The washer drain hose is 1ΒΌ” O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing should be a minimum of 30″ high. In order for the drain hose to function properly, the drain must be at least 30″ from the floor and less than 8 feet high.

Are washing machine drain hoses Universal?

The drain hose is designed for a universal fit and connects your washing machine drain outlet directly to the drain.

Can a washer and sink share a drain?

The plumbing code requires one on every drain and has established rules governing its size and distance from the fixture trap. If you’re joining a washing machine and kitchen sink on the same drain, you may be able to vent them both with a single vent if they are close enough together.

When my washing machine is draining it overflows?

One of the most common reasons for your washing machine drain to overflow is caused by a clog in the drain standpipe. Over time, different items such as dirt, lint, and hair could begin to slowly build-up within the pipe to create a blockage that will stop water from draining fully.

Can I use a studor vent for a washing machine drain?

Mini-Vent (US / ASTM) It can also be used with other Studor AAVs to complement larger and high-rise building drainage systems and is ideal for all single fixtures: washing machines, toilets, sinks, baths and showers, etc.

How high should a washing machine standpipe be?

P2706.2 Standpipes for automatic clothes washers shall extend a minimum of 30 inches (762 mm) and a maximum of 48 inches (1219 mm) above the finished floor. The trap for a clothes washer shall be installed at a maximum of 12 inches (305 mm) above the finished floor.

How do you check a washing machine drain pipe?

An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump. If the hose is worn or badly kinked, replacing the hose may improve the ability of the machine to pump water.