How many square feet does deck stain cover?

On average most deck stains cover 150-300 sq. ft. per gallon depending on the age, condition, and porosity of the wood.

You’ll need about 2 gallons of stain to cover a 500-square-foot deck. Most stains come in 1-gallon containers and provide around 200 to 300 square feet of coverage per can.

Additionally, how much should I pay to have my deck stained? The cost to pay someone to stain a deck ranges from $0.50 to $5.50 per square foot depending on the condition of the wood, if the deck has railings, and whether power washing, sanding, and stripping are required.

Similarly, it is asked, how do I figure out how much wood I need to stain?

Divide the total square feet of fence to be stained by the coverage listed on the can. For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence.

How many square feet does a gallon of Thompson’s Water Seal cover?

400 square feet

Should I power wash my deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Is one coat of deck stain enough?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.

Can you use a roller to apply deck stain?

A paint roller can be used to roll stain on. A wide 18-inch roller may work well for staining a few fence or deck boards at a time but a mop or stain pad will hold more stain lessening the amount of time you have to dip back into the stain bucket.

How long should you wait to stain a deck after pressure washing?

48 hours

How often should a deck be stained and sealed?

Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

How often should you stain your deck?

Most pros recommend you restain a horizontal surface every two to three years. That said, properly preparing, cleaning and drying the surface before applying a stain will yield the best results for the stain to last at least that long. You want to make sure there are no traces of sealant present on the deck.

What color should I stain my deck?

Deck Stain Color – Grape Slate If you have tan siding, a dark, wooded backyard or desert landscaping, wood stains in a wash of blue, like Grape Slate, can bring a relaxing tone to your outdoor area. It can give an old deck a much-needed change for the better and bring more visitors to your outdoor gatherings.

How much stain do I need for 400 square feet?

For example, if you have 400 square feet of floor to cover and a can of stain covers 220 square feet, you need two cans of that stain.

What colors does stain come in?

Minwax® Water Based Wood Stain Bright & Bold Crimson. Tangerine. Daffodil. Green Tea. Hunter Green. Navy Blue. Island Water. Burgundy.

How many coats of stain do I need for a fence?

In most cases, solid-color stains are like traditional paint and need just one coat to protect your fence. Semi-transparent penetrating stains often need two coats, with the second coat applied approximately an hour after the first coat.

How much stain do I need for a door?

Cost to Stain a Wood Door Stain a Wood Door Costs Zip Code Low High Stain a Wood Door – Installation Cost $116.00 – $121.00 $175.00 – $195.00 Stain a Wood Door – Total $161.00 – $173.00 $260.00 – $295.00 Stain a Wood Door – Total Average Cost per square Foot $8.35 $13.88

How much should I charge to stain a fence?

The price of having a professional paint or stain your fence averages $2,000. Homeowners could pay anywhere between $750 to $4,250 depending on the condition, height and length of the fence. Costs average $3 to $17 per linear foot or $1 to $2.50 per square foot.