How soon can I swim after Pebble Tec install?

DO wait at least 14 days before heating the water and monitor chemical balance more closely after you turn on your heater. DO wait at least 28 days before adding salt to the pool, if using a salt water chlorine generator.

In all cases, allow time for the initial curing process (approximately 30 days) before judging the finish or color.

Also, how do you maintain a Pebble Tec pool? Here’s what you need to do to maintain that perfect score:

  1. Clean regularly. Use a skimmer to remove all debris and brush the pool surface once a week.
  2. Maintain water levels. Sunlight and temperature lead to evaporation, so the water level will need to be monitored.
  3. Circulate the water.
  4. Keep chemicals balanced.

Correspondingly, can you acid wash a Pebble Tec pool?

Acid washing is a process that is done on a pebble tec® or plaster pool to remove a thin layer of the surface to remove stubborn stains and calcium deposits. Then a solution of muriatic acid and water is applied to remove the top coat of the pool. This is done manually using an acid brush.

How soon can you swim in pool?

It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.

How long does a Pebble Tec pool last?

20 years

Can you drain a Pebble Tec pool in the summer?

Webster warns against emptying the pool during summer: Don’t empty a plaster pool if it’s 90 degrees or higher or a pebble tec pool if it’s hotter than 95 degrees?the heat could cause cracking. While you’re at it, have that white line sandblasted.

How much does Pebble Tec cost?

So when people say Pebble Tec, what they really mean most of the time is pebble finish. In terms of prices, a typical Pebble Tec pool resurfacing cost is estimated at $5,000 to $7,000 for simple resurfacing projects. Meanwhile, the more high-end Pebble Tec remodels can easily cost as much as $8,000 to $15,000.

Can you use a wire brush on Pebble Tec?

Brushing a Pebble Tec surface is also very important, especially during the first few weeks after application, but also afterwards, to keep dirt and algae from building up on the slightly irregular surface. Be sure to use only a nylon pool brush, never use a steel bristled pool brush on a Pebble Tec surface.

What is Pebble Sheen?

Pebble Sheen® is Our Most Popular Pool Finish Pebble Sheen® brand pool finishes combine the natural beauty and durability of Pebble Tec® with smaller pebbles to create the look of rich granite. This interior finish is lightly buffed to incorporate a luxuriously refined feel with dramatic and stylish ambiance.

Can you put Pebble Tec over plaster?

In a desert environment, such as the North Scottsdale area, Pebble Tec® matches the natural surroundings much better than plaster. It’s a little rougher on your feet than plaster, and if that is a concern, you can check out Pebble Sheen® which is very similar to Pebble Tec® but has a duller surface.

What is Pebble Sheen for pool?

Pebble Sheen Pool Finishes. Our most popular pool finish offering the same natural beauty and inherent qualities as the original PebbleTec® pool finish with a more refined texture.

Can you repair Pebble Tec?

Yes; however, all repairs and patches should be done by a PTI certified builder or authorized applicator.

Is Pebble Tec better than plaster?

Compared to plaster, Pebble Tec is more expensive due to the high quality pool resurfacing material it uses. Pebble Tec is a little rougher. Pebble Tec pools are a little rougher on your feet than plaster. However, depending on the Pebble Tec you choose, some are smoother than others.

Can you acid wash a pool without draining?

No Dran® Acid Wash is the only way to acid wash your swimming pool without draining water. Its patented acid mixture and process is strong enough to lift the toughest stains and scale without draining water. Yet it’s also formulated to be safe for any surface, reducing the dangers of etching and discoloration.

How do you remove scale from Pebble Tec pool?

If you had regular plaster the only choice to smooth out would have been to sand the pool down, ouch. An acid wash will soften the calcium and loosen the scales for sure on your pebble-tec. They will come off easily with a brush after such treatment.

How often should I acid wash my pool?

Most plaster coats (sometimes called whitecoat or marcite) are in excess of 1/2″, so a careful acid wash every 5 years won’t hurt.

What is the best pool cleaner for Pebble Tec?

5 Best Pebble Tec Pool Vacuums – Reviews Dolphin Premier Robotic – Top Pick. View Latest Price on Amazon. Polaris F9550 – The Runner-up. View Latest Price on Amazon. Polaris Vac-Sweep 360 – Best for the Money. View Latest Price on Amazon. Hayward Poolvergnuegen 896584000-013. View Latest Price on Amazon. Polaris Vac-Sweep 3900.

How much does it cost to have a pool acid washed?

If your pool measures about 500 square feet then, an acid wash might cost you about $175 to $250. The price includes the labour cost and necessary chemicals as well. If you want to perform the wash on your own, then you will save labour charges and will need to spend only on chemicals that might cost you around $30.