What saw blade for reciprocating?

The rugged reciprocating saw is one of the most versatile power tools you can own. But for the saw to be at its best, it needs the right blade for the material you’re cutting. High-carbon steel blades are fine for clean wood; use more expensive bimetal (spring steel back and high-speed steel teeth) for wood with nails.

Let’s take a look at what’s important when choosing a reciprocating saw blade.

  1. Material Type. No single reciprocating saw blade can cut every type of material.
  2. Teeth per inch (TPI)
  3. Blade Material.
  4. Tooth Material.
  5. Tooth Patterns.
  6. Blade Length.
  7. Blade Thickness.
  8. The best Goto-Blade.

Additionally, what size reciprocating saw blade do I need? Reciprocating saw blades range from 3 – 24 TPI. The number of teeth per inch determines the cut speed and roughness of the cut. Lower TPI blades cut fast but leave rougher edges. Blades in the 3 – 11 TPI range are typically best for wood and demolition work.

do reciprocating saw blades fit all saws?

Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.

Can a reciprocating saw cut nails?

Reciprocating saws cut through just about everything short of a rock. With a recip saw (also called a Sawzall, the brand name of Milwaukee’s tool), you can cut through lumber even if it’s embedded with nails. It can also cut all common forms of metal: steel, aluminum, copper, and cast iron.

How thick can a reciprocating saw cut?

There are three facets to a reciprocating saw blade: Length, width, and thickness. The longer the blade, the deeper the cut. Wider blades will reduce bending and wobbling. Heavy-duty blades are typically 7/8-inches wide and 0.062-inches thick.

Can you use a reciprocating saw to cut firewood?

So a reciprocating saw will not be the fastest tool for thick firewood. Btw your other option is a hand saw with large teeth – if the teeth are hardened they stay sharp very long. This is slower than a chainsaw but much cheaper. Yeah a reciprocating saw would take forever to cut through normal sized firewood.

How long does a saw blade last?

Some users might get a couple weeks out of a top grade, well sharpened, circular saw blades. Others may get three years from the same blade, under different cutting circumstances.

How long are reciprocating saw blades?

Reciprocating saw blades range from 3 – 12-inches long. Keep in mind, the longer the blade, the deeper the cut.

How many teeth is an inch?

For very hard materials, more teeth per inch may improve performance. Use more teeth per inch for a smoother finish. For faster cutting, use fewer teeth per inch but maintain a minimum of 3 teeth in contact with the work at all times.

Can you cut concrete with a reciprocating saw?

Cutting concrete with a reciprocating saw begins with safety gear. Cutting concrete creates dust and sends sharp shards of material flying toward the tool operator. Because concrete dust can cause respiratory discomfort or damage, reciprocal saw operators must wear face masks or respirators.

What is the best blade to cut stainless steel?

Circular Saw Hand held circular saws are one of the best tools for cutting large stainless sheet metal panels. There are two basic types of metal cutting blades. The cheapest is an abrasive blade or cutting wheel. These are made from abrasive grit pressed into a blade with fibers running through it to bind it together.

Are reciprocating saws dangerous?

Reciprocating saws can cut through wood, metal, and all sorts of construction materials. But they can also be dangerous and need to be handled with the utmost care. One of the main hazards of recip saws is their potential for kickback.

Can I use a reciprocating saw to cut tree limbs?

Joe Truini: A reciprocating saw is one of the most versatile power tools you can own. It can cut virtually any building material. But it’s also great for trimming tree branches. Now you can use a standard reciprocating saw blade to cut tree branches, but you’ll get much better results if you use a pruning blade.

What’s the difference between a reciprocating saw and a Sawzall?

The Sawzall is a reciprocating saw. Milwaukee also has a line of reciprocating called HACKZALLS. It’s easy to see why Sawzall is used to refer to any reciprocating saw. This type of saw is designed to cut through anything and everything.

Are saw blades universal?

Since circular saw blades come in so many different shapes and sizes, and are made for alternate purposes, they are not universal and interchangeable with just any circular saw. If you have ever required the use of a circular saw for any task, you might have asked yourself if the blades are interchangeable.

What’s the best reciprocating saw?

So here is my list of The 10 Best Reciprocating Saws. Ryobi P514 Cordless One+ Reciprocating Saw. PORTER CABLE PCC670B Cordless Reciprocating Saw. SKIL 9206-02 Reciprocating Saw. DEWALT DCS367B Cordless Compact Reciprocating Saw. BLACK+DECKER BDCR20B Cordless Reciprocating Saw. Makita JR3050T Reciprocating Saw.

Are circular saw blades Universal?

Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices. This guide will help you use the correct blade for each job.